CHAPTER 5
Instructions, use and maintenance manual
D r a g o P 1
Page 59
Make the connection by following the steps below:
STEP
ACTION
PICTURE
1
Unroll the copper pipe “G” (supplied) and insert
the end into the grip point “H” of the burner.
CAUTION!
Be careful to shape the
copper pipe with wide curves
so as not to damage it.
H
G
G
2
Tighten the nut “I” of the burner until with a
spanner (11 mm).
I
3
Insert the other end of the copper pipe “G” into
the grip point “L” of the control panel and tighten
the nut with a spanner (11 mm).
L
G
