Short work range of headphone
- Work range is decided by devices on BOTH ends. Please test the
work range of headphone is ok
- test it with your smart phone.
Source issue
- When you play an internet source from PC, Mac or cellphone, quite often, the audio
cuts are Internet bandwidth / speed related. Please test with local source Bluetooth streaming and
check again.
3. Audio delay
Bluetooth headphone is NOT aptX LL supported - If your Bluetooth headphone does not support
aptX LL, it will work with the Audikast using SBC codec with 220ms latency, you will experience a
noticeable lag between sound and picture.
4. Reconnect
NO need to re-pair the Audikast and headphones for each use, the Audikast will ALWAYS auto
reconnect to the last paired device once you power on both devices and wait for 5-10 seconds .
Otherwise, turn OFF both the Audikast and headphone, then turn them both back ON and wait 5-10
seconds for them to reconnect.
For the 2nd headphone, it will also auto reconnect to the Audikast after waiting 5-10s once power
on. Otherwise, you will need to turn OFF and ON both transmitter and 2nd headphone again, or click
once on 2nd headphones.
More FAQs at:
https://support.avantree.com/hc/en-us/sections/360000234843-Audikast-BTTC-418-BLK-
8
