background image

Troubleshooting

1. 10BS won’t auto power on when I enter the car?

Please make sure you DID NOT MANUALLY POWER OFF THE CAR KIT. Doing so will disable the “auto 

power on” function. Details please refer to “Auto Power On/Off” function chapter.

2. 10BS continuously beeps while driving?

The 10BS comes with motion sensor. It will auto power on when it detects any motion (e.g. opening 

the car door). Once it powers on, it will BEEP and try to auto-reconnect with the last paired mobile 

phone. If not successful, it will auto power off after 10 minutes and BEEP again. Please make sure 

your phone’s Bluetooth is activated, or you may need to disable the Auto Power On function (refer 

to “Auto Power On/Off” function chapter).

3. 10BS can't pair and connect with 2 devices at the same time?

If 10BS fails to connect two phones, please confirm the multipoint function is on. While in standby 

mode, press and hold the "V-" / "V+"buttons for 3s until you hear a beep to turn on/off the Multipoint 

function.

 

6

Reviews: