15
ADJUSTING THE MOVABLE TOE KICK (MODEL DEPENDING)
Now that you have successfully installed the dishwasher, you need to attach the toe kick to the
dishwasher. The two-piece toe kick can be adjusted to the height and depth
needed
for your
kitchen.
1.
A. If the height is 33 7/8" to 35 7/8"
(860mm-910mm) and use short supports; adjustable
plinth metal with 80 mm length (v), toe kick
brackets(o) are installed. Mounting is done using
Screws Ø 5/32” x 7/32” (Ø 4mm x 6mm) with a Philips
Screwdriver.
B. A. If the height is above 35 7/8" (910mm) and use
short supports; adjustable plinth metal with 130 mm
length (v), toe kick brackets(o) are installed. Mounting
is done using Screws Ø 5/32” x 7/32” (Ø 4mm x 6mm)
with a Philips Screwdriver.
2. The adjustable plinth number is
determined according to the required
distance and assembled to each other.
3. As shown in the Figure, the cylindrical feet
of the adjustable plinth are attached to the
plinth fixing metal parts and shifted through
the cavity of the part.
3. Depending on the desired depth, plinth
locking(y) is attached to the toe kick bracket(o).
4. Finally, Toe kick brackets(o) are attached to
the gaps under the machine and the installation
is completed.
y
o
p
t
870x1
880x2
890x3
900x4
910x5/6
r
s
870x1
880x2
890x3
900x4
910x5/6
s
