avantec DT910N, User Manual

Page: 20 / 26

20
8.4.2 Recall Time (Flash Time)
Use this option to select the correct recall (flash) time for your
system/country setting.
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ BS SETUP ” is displayed.
3. Press key, then press key until “ ADVANCE SET ” is
displayed.
4. Press key, and enter PIN code (default as “0000”).
5. Press key until “ RECALL TIME ” is
displayed.
6. Press key, then use / key to
select the desired Recall Time.
7. Press key to save the change.
8. Press key to go back to standby screen.
8.4.3 Unregister
Use this option to delete the registration entry of a handset from its
base station.
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ BS SETUP ” is displayed.
3. Press key, then press key until “ ADVANCE SET ” is
displayed.
4. Press key, and enter PIN code (default as “0000”).
5. Press key until “ UNREGISTER ” is
displayed.
6. Press key, then Use / key to
select a handset number that you want to
remove from the base station.
7. Press key to confirm.
8. Press key to go back to standby screen.
Alternatively, you may unregister all handsets from their Base Station
at once.
1.
Press the paging button on the Base Station
2. Hold down on the paging button and see that the LED turns
yellow
3. Keep holding down on the paging button until the LED turns red