Avante FURMDKAVNAH12 User Manual Download Page 8

Page: 8 / 12

Motorised Height Adjustable Desk

E&OE

Gearbox Reversal

Due to the modular nature of the design, on occasion the "gearbox" in the desk legs may be

mounted in reverse, which will cause one leg to move in the opposite direction to the other. This

happens rarely, however, can be easily remedied. • Carry out the following procedure only if required, and on

the leg that is being driven UP when "

▼

" is pressed on the control panel.

If it is necessary to rotate the gearbox so the orientation is correct:
1. Loosen the drive link collar (

), then slide the drive link shaft (

) from the gearbox (

2. Remove the 8 screws (

) securing the horizontal rail (

) to the leg upright section (

3. Remove the 2 screws (

) (under the sticker) at the top of the gearbox.

4. Pull the gearbox up (

) and out from the leg and rotate it 180° (

), then re-insert it into the leg (

5. Re-install the 2 screws (

) at the top of the gearbox (

6. Re-install the 8 screws (

) securing the horizontal rail (

) to the leg upright section (

7. Slide the drive link shaft (

) back into the gearbox, then tighten the drive link collar (

When finished, it is recommended to

check for correct movement

, then continue assembly from

step 6

ANTE

Summary of Contents for FURMDKAVNAH12













Search results

Summary of Contents for FURMDKAVNAH12

Reviews:

Avante FURMDKAVNAH12, User Manual, Page: 8 / 12

Search results

Summary of Contents for FURMDKAVNAH12

Reviews: