Avantco KEGRTRBLK, User Manual

Page: 9 / 18

- 9 -
User Manual
CO2 CANISTER TO CABINET INSTALLATION
• Lift and place the CO2 canister (12) with the CO2 regulator (6) on the shelf
at rear right hand corner of cabinet. It is important that the canister be
kept in an upright position to operate efficiently. Hook one end of retaining
strap (3) over metal bracket at rear, then stretch around canister and hook
other end over front bracket.
KEG TO CABINET INSTALLATION
• Place the keg on the support shelf and push back next to the CO2 canister
(12) (See TIPS ON INSTALLING KEG TO THE CABINET) inside the cabinet
as shown.
DELIVERY HOSE ARRANGEMENT
WARNING
SAFE KEG HANDLING
• Installing the keg to the cabinet is a two-person team effort . NEVER
lift a full keg alone . Doing so may cause severe injury .
• With the door fully open and the help of another person, lift the keg
vertically on both sides until the keg is higher than the keg support
shelf .
• Set the edge of the keg on top of the plastic protective plate located
on top of keg support shelf . Slide the keg back until it is fully inside
the cabinet .
• Care must be taken to avoid damage to the temperature control and
shelf tower located in the cabinet .(12) (See TIPS ON INSTALLING
KEG TO THE CABINET) inside the cabinet as shown .
NOTE: The illustration does not show the tap installed for clarity of installation.
NOTE: Failure to route hoses properly may
cause the hose to become kinked or caught in
door .