18
2. Alternatively, press the“ “button to display a menu that can be used to quickly access
the group of parameters to be modified.
3. Scrolling the menu using the “ “and “ “buttons displays the codes of the
various categories of parameters, accompanied by the corresponding icon on the display
(if present).
4. Once having reached the desired category, press “
Set”
to go directly to the first
parameter in the chosen category (if no parameter is visible, pressing the “
Set”
button will
have no effect)
5. At this stage, modify the parameters or return to the “Category” menu, using the
“ “button.
6. Press ”
Set
” to display the value associated with the parameter.
7. Increase or decrease the value using the “ “ or “ “ buttons respectively.
8. Press “
Set
” to temporarily save the new value and return to the display of the parameter.
9. Repeat the operation from point 1 or point 2.
10. If the parameter has sub-parameters, press “
Set
” to display the first sub-parameter.
11. Press the “ “or “ “ button to display all the sub-parameters.
12. Press “
Set
“to display the associated value.
13. Increase or decrease the value using the “ “ or “ “button respectively.
14. Press “
Set
” to temporarily save the new value and return to the display of the
sub-parameter code.
15. Press “ “ to return to the display of the parent parameter.
Saving the new values assigned to the parameter
To permanently save the new values of the modified parameters, press the “ “ button
for more than 5 seconds, thus exiting the parameter setting procedure. All the
modifications made to the parameters temporarily saved in the RAM can be canceled and
“normal operation” is resumed by not pressing any buttons for 60 seconds. All the
modifications made to the parameters that were temporarily saved will be lost.
