background image

User Manual

2 www.AvantcoEquipment.com

General Safety Regulations

WARNING: 

The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions 

or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot 
be built into this product, but must be supplied by the operator.

Please use this machine according to these cautions. The user should understand all rules. Please carefully read them 
before you operate the machine. This machine may cause harm to the health of the operator if the user removes or changes 
equipment in the machine. 

We are not responsible for any injuries resulting from improper operation of this machine. Please operate according to 
“Operation Method” instructions and follow the proper operation procedures while using. Take care while assembling and 
operating, in order to avoid scratching skin. Please read the instruction manual.

• 

CHECK FOR DAMAGED PARTS. Before using the stuffer, check that all parts are operating properly and perform 
the intended functions. Check for binding of moving parts, mounting and any other conditions that may affect the 
operation.

• 

The Manufacturer declines any responsibility in the case of improper use of the stuffer. Improper use of the stuffer 
will VOID the warranty.

• 

Repair must be done by an authorized dealer. Use only factory original parts and accessories. Modification of the 
stuffer will VOID the warranty.

• 

Be sure the stuffer is stable during use. 

• 

NEVER operate the stuffer with the gear housing cover open or removed.

• 

WEAR EYE PROTECTION! Everyday eye glasses are not safety glasses. Safety glasses conform to ANSI Z87.1 
requirement. Note: Approved safety glasses have Z87 printed or stamped on them.

• 

Do not use outdoors

• 

SAVE THESE INSTRUCTIONS

Summary of Contents for 177SS20V









Reviews: