Avantco 177FF300L, User Manual

Page: 4 / 23

User Manual
4
Specifications
Gas Suppy and Burner Information
Supply pressure should be minimum of 4" W.C. for natural gas or 10" W.C. for propane. The fryer comes with 3/4"
NPT male connector on a 1/2" pipe, allowing you to connect with either 3/4" or 1/2" NPT female connector.
Model Burners Gas Type Manifold
Pressure
Number of
Heat Tube
Rate Each
BTUs / Hour
Total Rate
BTUs / Hour
Orifice
Size
177FF300 Main Natural 4" W.C. 3 30,000 90,000 #39
Propane 10" W.C. 3 30,000 90,000 #52
177FF400 Main Natural 4" W.C. 4 30,000 120,000 #39
Propane 10" W.C. 4 30,000 120,000 #52
177FF518 Main Natural 4" W.C. 5 30,000 150,000 #39
Propane 10" W.C. 5 30,000 150,000 #52
* Minimum supply pressure is 4" W.C. for natural gas and 10" W.C. for propane.
** Orifice sizes are for units installed at altitudes between 0 and 2000 feet above sea level.
Gas Type
Size at
Sea
Level
2,000' 3,000" 4,000' 5,000' 6,000' 7,000' 8,000' 9,000' 10,000'
Natural 39 40 41 41 42 42 43 43 44 44
LP 52 52 53 53 53 53 53 54 54 54
GAS FRYER ELEVATION CHART