background image

User Manual

www.AvantcoEquipment.com 3

Important Safety Information

WARNING!  

When using electrical appliances, basic safety precautions should always be followed, 

including the following:

1. 

Read all instructions carefully and completely.

2. 

For commercial use only.

3. 

Do not touch hot surfaces.

4. 

Protect against electrical shock by keeping all cords, plugs, and other electrical components away 

from water or other liquids.

5. 

Unplug this unit when not in use and before cleaning.

6. 

Allow the unit to cool before putting on or taking off parts.

7. 

Do not operate this or any appliance with a damaged electrical cord or plug.

8. 

Do not operate this or any appliance after it has malfunctioned or been damaged in any way.

9. 

Do not use outdoors.

10. 

Disconnect the unit by turning the temperature control to "OFF", then removing the electrical 

plug from the wall outlet.

11. 

Do not use appliance for any application other than intended use.

12. 

Do not allow this oven to touch or be covered by flammable material, such as curtains, draperies, 

walls, etc., when in operation.

13. 

Do not clean with metal scouring pads as pieces can break off and touch electrical components, 

heightening the risk of electrical shock

14. 

This appliance is not intended for use by persons (including children) with reduced physical 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the appliance by a person responsible for their 

safety.

15. 

Place unit on a flat surface that is well ventilated. The appliances must be supervised during 

operation, DO NOT leave appliance without powering off.

NOTE: SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE�

Summary of Contents for 177CER200









Reviews: