User Manual
www.AvantcoEquipment.com
9
User Manual
www.Avantco.com
1.
Fold a cloth wipe that has been submerged in fresh detergent solution and
work it
between the ring guard and the knife, starting at the base of the ring
guard. Carefully
work the cloth around the knife, cleaning the edge of the ring
guard and edge of the
gauge plate.
2.
Sanitize and allow to dry.
1.
Clean the machine body with a damp
cloth
or a sponge rinsing frequently
with hot
water and cleaning solution.
Rinse with hot
water. Sanitize and let air
dry.
2.
Clean also the gauge plate and
the
indexing knob. While doing this
operation
pay attention to the knife.
Don’t open the
gauge plate or you risk
to be cut!
The components contained in the base do not need any special cleaning;
occasionally remove the dust that can accumulate in the end area of the carriage
and of the thickness plate regulation.
1.
Make sure the sharpener knob at the base of the sharpener is loose
(about 10
turns).
2.
Insert the sharpener as shown in the picture until it stops at its correct position
and
screw the knob.
9
