User Manual
4 www.AvantcoEquipment.com
Ceramic Deck Installation
Oven Installation
NOTE: New deck must be conditioned (pre-dried) prior to first use.
•
Handling the Ceramic Deck:
If deck is struck against hard surface before, during or after
installation, it can develop a full or hairline crack which may expand over time and require
you to replace it.
•
Conditioning the Deck:
Pre-dry ceramic deck by carefully following instructions in the
following section, BEFORE USING YOUR PIZZA OVEN.
NOTE: Failure to follow conditioning instructions will cause deck to crack or warp and will
void warranty.
•
Installing the Deck:
Open the oven door and place ceramic pizza deck into the bottom
with the slots on front of deck facing front of oven.
Be sure the deck is firmly set in place.
DO NOT force or wedge it. (Fig. 2)
1. After removing the outer shipping carton and packaging material, place the oven on the floor or
other flat surface.
2.
Open
oven and remove any instructions or packaging material shipped in the unit.
3. With sufficient help, lift up the front of the oven and attach the two front legs (packed separately
in styrofoam), carefully twisting each one into a corner and hand-tightening. Lift the back of the
oven approximately 5 inches and block into position using a piece of wood or other solid object.
Then, attach the two back legs and hand tighten.
4.
Move the
oven to its final location. Adjust the bottom portion
of the legs to level the unit. (fig. 1)
Fig. 1
Slots
Fig. 2
