Avantco Equipment 177DHC13, User Manual

Page: 13 / 19

User Manual
www.AvantcoEquipment.com 13
User Manual
www.AvantcoEquipment.com 13
User Manual
2 www.AvantcoEquipment.com
Index
Parts Overview .............................................................. 3
Standard Accessories .................................................... 4
Operation Instructions .................................................. 4
Figure 1: Gear Axle ........................................................ 5
Figure 2: Initiative Axle .................................................. 6
Figure 3: Fork ................................................................. 7
Figure 4: Change Speed Axle ........................................ 8
Figure 5: Turning Plate and Mixing Axle ....................... 9
Figure 6: Single Phase Motor Diagram ....................... 10
Figure 7: Center Axle ................................................... 11
Maintenance and Protection ........................................ 12
Troubleshooting ........................................................... 13
Warranty Information ................................................... 13
IMPORTANT SAFEGUARDS
1. When using electrical appliances, basic safety precautions should always be followed including the
following:
2. Read all instructions.
3. Close supervision is necessary when any appliance is used by or near children.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Return appliance to the nearest authorized service facility for
examination, repair or electrical or mechanical adjustment.
injury.
8. Do not use outdoors
9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to
reduce the risk of injury to persons, and/or damage to the mixer.
SAVE THESE INSTRUCTIONS
Cleaning ........................................................... 13
Cleaning and Maintenance
Fig.37 shows a bpwl which is not correctly assembled;here the bowl does NOT
insert the mixer into its seating following the steps descrlbed in paragr
7.3 in reverse order.
perfectly adhere to the machine edge.
Fix the bowl to the machine body using the relevant hook-on handles, as
To reassemble the tap, carry out in reverse all of the disassembly steps
trated previously (Fig. 32 to Fig. 27).
illustrated in the figure;
insert the mixer auger into its seating;
- 16_EN -
aph
7.8.2. Assembling the tap
illus-
To fi t the lever (F) push the rod (D) from the inside until the guides protrude;
SL320001846 Ed.03 - 06/2008
04/2010
7.8 Assembling the tap
WWW.AvantcoEquipment.com 13