AVANT e5 2018, Operator'S Manual

Page: 41 / 108

Avant e5
41
.
Multi-function display
The multi-function display shows various information
regarding the operation of the loader. This
information includes the following in normal use of
the loader:

Battery state of charge, as percentage

Estimated remaining battery run time in hours
and minutes
(estimate - actual remaining battery
life will vary heavily depending on use and load
of the loader, and the ambient temperature)

Instantaneous power consumption

Output flow of auxiliary hydraulics - in litres per
minute

Drive speed

Operating hours of the loader

Any fault codes detected by the control systems
of the loader
Button keys of the multi-function display
Press the button keys at the bottom of the screen to
change through different display modes and to
choose the page you want to have on the display.
NOTE: Some display modes have additional
information available, which you can access by
pressing a button key multiple times. All display
modes may not have additional information available.
.
.
During recharge:
When the integrated charger of the loader is
connected to mains outlet, the display will show
estimate of the remaining time left until the battery is
fully charged. The estimated time will vary on the
temperature of the battery, and can change
significantly during recharge.
During recharge only some of the information that is
available in normal use is available.
See page 77 for information about the charge
process.