20 (30)
Auger protection valve
The snow blower is equipped with a function that will stop the auger when the force needed to rotate it
becomes excessively high. The purpose of the feature is to prevent damaging the auger when i.e. a large
block of ice or a foreign object enters the snow blower.
The attachment will start immediately after the blockage is cleared. If the snow blower stops during use, stop it
by following the safe stopping procedure and check the equipment. The safety feature will not affect the
normal operation of the snow blower. Contact service to check the operation of the system if necessary.
Adjusting the hydraulic system of the attachment is allowed only for authorized Avant service.
6.3
Using the electric functions of the Snow Blower
1.
A cable harness with a 2-way switch is delivered with the attachment.
Hold the switch towards either direction to turn the discharge chute.
This separate electric harness with a switch can be used only to
control the electric chute rotation.
See page
15 for instructions about how to connect the electric
harness of the attachment.
Select the location of the switch in the cab so that it is easily
accessible but will not be used inadvertently.
1.
Alternatively, when the loader is equipped with the optional
Attachment control switch pack, it can be used to control the
discharge chute rotation and throw height of the snow blower.
See page
¤
15 for instructions about how to connect the electric
harness of the attachment.
The discharge chute rotation is controlled by switch number 2 and
the throwing height with switch 3. Switch number 1 is not in use with
the snow blower.
Summary of Contents for Collecting 1500
Page 2: ...Snow blower 1500 2018 1 ...
Page 30: ......
