background image

6 (18) 

 

 

 

 

2.

 

Designed purpose of use 

The AVANT ripper is an attachment that is designed and manufactured to be used with AVANT multi-purpose 
loaders  shown  in  Table  1.  It  is  an  inexpensive  and  practically  irreplaceable  tool  in  ground  works.  With  the 
ripper  it  is  easy  and  effortless  to  remove  roots  as  well  as  rocks  even  from  hard  packed  ground.  The 
replaceable hard metal teeth guarantee a long lifespan for the attachment. The ripper is best suited to a loader 
that is equipped with telescopic boom. 

The ripper is not designed for any other use than specified and must not be used for any other purposes than 
intended. 

 

The  attachment  has  been  designed  to  require  as  little  maintenance  as  possible.  The  operator  can  perform 
regular  maintenance  tasks.  All  repair  work  can’t  be  performed  by  the  operator,  and  demanding  repair  and 
maintenance operations are to be left for professional maintenance. All maintenance work must be done using 
proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by 
using only original spare parts. A separate spare parts catalogue may be available, consult your Avant dealer. 

Familiarise  yourself  with  the  manual's  instructions  regarding  service  and  maintenance.  Please  contact  your 
AVANT retailer if you have additional questions about the operation or maintenance of the equipment, or if 
you require spare parts or maintenance services. 

 

Table 1 - Ripper - Compatibility with Avant loaders 

Avant 

220

 series 2

 

225 

225LPG 

313S 
320S 

420 
423 
520 
523 

R20 

525LPG 

R28 

528 
530 

630 

R35 

635 
640 

745 
750 

755i 
760i 

e5 
e6 

A44412 

 

 

 

 

 

 

 

 

 

Summary of Contents for A44412



















Reviews: