background image

  

13 

(18) 

 

 

6.

 

Instructions for use 

Practise the use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the 
particular loader model, it is recommended to practice its use without any attachments. 

 

6.1

 

Checks before use 

  Ensure  that  bystanders  are  at  a  safe distance when  operating  the  equipment.  Do  not  let  anyone  to 

enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to 
reverse  with  the  loader.  Never  assume  that  bystanders  will  remain  where  you  last  saw  them; 
especially children are often attracted to the moving equipment. 

  Check  the  general  condition  of  the  attachment  and  the  loader,  and  check  for  possible  hydraulic  oil 

leaks. The attachment must not be used, if there is a fault in the hydraulic system of the loader or the 
attachment. Refer to Chapter 7 for maintenance instructions. 

  Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure 

that the loader and the attachment are used in a safe manner and as intended. Do not allow children 
to operate the equipment. 

  Never operate the loader or attachments while under the influence of alcohol, drugs, medication that 

may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment. 

  Remember correct working methods and avoid leaving the driver’s seat unnecessarily. 

 

6.2

 

Operator qualification 

Anyone who intends to use the attachment must: 

  Know the intended use of the attachment. 

  Know how to use the loader safely in different operating conditions. 

  Read  and  always  follow  the  instructions  concerning  the  use  of  the  attachment  in  this  operator's 

manual. 

  Have this manual and the operator's manual of the loader available. 

  Ensure that the loader and the attachment are used in a safe manner and as intended. 

  Never allow children to operate the equipment. 

  Never operate the loader or attachments while under the influence of alcohol, drugs, medication that 

may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment. 

  Complete any possible mandatory training required by the employer before use. 

 

Summary of Contents for A44412



















Reviews: