background image

 

 

11 (22) 

 

 

5.

 

Instructions for use 

Practise the use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the 

particular loader model, it is recommended to practice its use without any attachments. 

 

5.1

 

Checks before use 

  Use only when the attachment is properly locked and secured onto the trailer coupling of the loader. 

  Check that there are no broken tines in the cultivator. 

  Remove all obstacles from the operating area beforehand. Remember correct and healthy working 

methods and avoid leaving the driver’s seat unnecessarily. 

  Check the operating area from deeper than 100 mm depth to ensure that the cultivator can be used 

without damaging the sublayers of the area. 

  Do not use the attachment to transport loads or persons. 

  Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to 

enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to 

reverse with the loader. Never assume that bystanders will remain where you last saw them; 

especially children are often attracted to the moving equipment. 

  Check the general condition of the attachment and the loader, and check for possible hydraulic oil 

leaks. Do the daily checks of the loader, see the operator's manual of the loader. The attachment must 

not be used, if there is a fault in the hydraulic system of the loader or the attachment. Refer to Chapter 

7 for maintenance instructions. 

  Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure 

that the loader and the attachment are used in a safe manner and as intended. Do not allow children 

to operate the equipment. 

  Remember correct working methods and avoid leaving the driver’s seat unnecessarily. 

 

 

5.2

 

Operator qualification 

Anyone who intends to use the attachment must: 

  Know the intended use of the attachment. 

  Know how to use the loader safely in different operating conditions. 

  Read and always follow the instructions concerning the use of the attachment in this operator's 

manual. 

  Have this manual and the operator's manual of the loader available. 

  Ensure that the loader and the attachment are used in a safe manner and as intended. 

  Never allow children to operate the equipment. 

  Never operate the loader or attachments while under the influence of alcohol, drugs, medication that 

may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment. 

  Complete any possible mandatory training required by the employer before use. 

 

 

 

WARNING

 

Avoid running over persons - Check surroundings before driving.

 Always look in the 

direction the loader is moving. Before reversing, always ensure that bystanders, 
especially children, are at a safe distance to avoid back-over accidents. 

 

  

 

Summary of Contents for A442314























Reviews: