22 (28)
Switches of the Attachment control switch pack with Opticontrol
®
1.
Not in use with this attachment
2.
2-way selection switch: Use for rotating the attachment to the left or
to the right.
3.
Not in use with this attachment
Use the red and blue pushbuttons on the joystick or the auxiliary
hydraulics control lever to open and close the grapple.
6.4
Working on uneven ground
Extra caution is needed when using the equipment on inclined terrains and slopes. Drive slowly especially on
inclined, uneven, or slippery surfaces, and avoid sudden changes in speed or direction. Operate the controls
of the loader with careful and smooth movements. Watch out for ditches, holes on the ground, and other
obstacles, as hitting an obstacle may cause the loader to tip over.
Maximum lifting capacity can not be achieved on inclined terrain. On horizontally tilted terrain the load must
not be lifted high. The loader frame articulation should be kept straight when lifting heavy loads; turning the
load during lifting operation will affect the stability of the loader and may lead to overturning of the machine.
6.5
Transport position
When driving with the loader, keep the Timber
grab as low and close to the loader as possible
as shown in adjacent figure.
Adjust the drive speed according to the operating
conditions and surface. Always drive slowly while
operating the Timber grab.
When driving with a load, set the attachment to position that does not block visibility from the driver's seat.
Keep load low and ensure balance of the loader. Prevent grab from swinging.
CAUTION
Keep the loader stable. Always transport the attachment as low and close to the ground
as possible. Keep the telescopic boom retracted during transport drive.
Summary of Contents for A437203
Page 2: ...Timber grab heavy duty 2020 1...
Page 28: ......
