16(18)
7.4.
Drive chain
The hydraulic motor of the spreader is maintenance free. There is a chain drive between the motor and
mixing and spreading shafts. The chain should be lubricated regularly. Remove the protective cover of the
drive system and oil the chain after every 20 to 40 hours of operation. Clean the cover and the surroundings
of the chain and check the free play of the chain. The chain play should be about 0,5 - 1 cm when measured
on its longest run between sprockets. If necessary, adjust the chain by moving the base of the hydraulic
motor. Secure the protective cover back to its place after maintenance procedures.
8.
Warranty terms
Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it
manufactures.
The warranty covers repair costs as follows:
•
Work costs are covered, if the repair is not performed at the factory.
•
The factory replaces any defective components or consumables.
The factory may reimburse the price of components purchased by the customer in special cases that have been agreed in
advance.
The warranty does not cover:
•
Normal maintenance work or parts and consumables required for it.
•
Damages caused by unusual operating conditions or ways of use, negligence, structural changes made without the
consent of Avant Tecno Oy, use of non-original parts or lack of maintenance.
•
Consequences of a defect, such as interruption of work or other possible additional damages.
•
Travel and/or freight costs caused by the repair.
Summary of Contents for A411401
Page 17: ...Sand Salt Spreader 150 2014 1...
Page 18: ......