background image

 

 

17 (28) 

 

 

6.2

 

Operating the Root grapple bucket 

 

 

 

WARNING

 

Risk of serious personal injuries - Ensure that there are no other persons near the 
operating area.

  Do not allow others closer than 5 metres form the grab, to the boom 

danger area, or directly in front or back of the loader. Move carefully and calmly near 
persons or farm animals. Also make sure that it is safe to reverse with the loader. 

 

 

 

Grab with the bucket to a 

selected object and rip it away 

from the ground by using the 

power of the loader. Keep the 

object being transported as 

close to the loader and as low 

as possible. When transporting 

objects with the Roots grapple 

bucket, ensure, that the load is 

secured on the bucket. 

 

 

 

 

 

To avoid damage of the hydraulic hoses and to avoid oil spill, the hoses must not 

get pinned or stretched in any position of the attachment or the loader boom. 

 

 

 

 

WARNING

 

Avoid sudden loss of stability - Never drag loads from e.g. a shelf.

 If the load that 

you want to lift from height is too heavy, the loader can tip forward when reversing with 
the loader. Never reverse and drag with the loader before making sure that the loader 
can handle the load that is being lifted. 

 

If the loader is not equipped with the boom self levelling:  

 

 

WARNING

 

Prevent material from falling on you -  Monitor the position of the bucket.

  When 

lifting material to a high level, the quick coupling plate must be simultaneously tilted to 
prevent the load from falling from on the loader or the operator. Fitting the loader with the 
boom self levelling option makes repeated loading work easier. 

 

Summary of Contents for A37537





























Reviews: