background image

 

 

15 (28) 

 

 

6.

 

Instructions for use 

Practise the use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the 

particular loader model, it is recommended to practice its use without any attachments. 

 

 

 

 

WARNING

 

Risk of tipping over - Avoid overload. 

Loader can tip over 

when  handling too heavy loads, or because of dynamic 
movements caused by driving with and handling of a heavy 
load. Do not extend the telescopic boom when the load 
approaches the lifting capacity of the loader, or when the 
loader boom is in horizontal position. When you notice that 
the rear wheels of the loader are about to lift from the ground, 
or if the load indicator of the loader (if fitted) signals: 

 

 

 

 

Lower the load calmly and retract the telescopic boom 

 

Avoid sudden changes in speed or direction whenever load is lifted 

 

Use additional counterweights as needed 

 

 

.. 

 

 

 

WARNING

 

Risk of falling from height and crushing under bucket or 
loader  -  Never use a bucket as a lifting platform or to 
carry people.

 Never use the loader or its attachments to lift 

persons or as any kind of work platform even temporarily. 
Never climb on the attachment. 

Always lower the bucket on the ground before leaving the 
driver's seat. The loader is not intended to hold loads lifted for 
longer periods of time. 

 

 

 

 

.. 

 

 

 

WARNING

 

Risk of crushing - The sharp tines of the attachment and 
its grapple can cause serious injuries.

  Make sure that 

there are no other persons at the operating area and keep a 
safe distance to persons or farm animals. Lower the grapple 
before driving with the loader. Stop the loader following the 
safe stopping procedure before going near the attachment. 

 

 

 

 

 . 

 

Summary of Contents for A37537





























Reviews: