AVANT A36015, Operator'S Manual

Page: 18 / 30

18 (30)
6.1 Checks before use

Check that all obstacles, including any possibly hidden ones, have been removed from the working
area or marked visibly before operation.

Check daily that the blades are intact and can rotate freely. Never use if blades are missing or broken.

Check that there is no string or other foreign material around the flail shaft.

Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to
enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to
reverse with the loader. Never assume that bystanders will remain where you last saw them;
especially children are often attracted to the moving equipment.

Check the general condition of the attachment and the loader, and check for possible hydraulic oil
leaks. The attachment must not be used, if there is a fault in the hydraulic system of the loader or the
attachment. Refer to Chapter 7 for maintenance instructions.

Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure
that the loader and the attachment are used in a safe manner and as intended. Do not allow children
to operate the equipment.

Never operate the loader or attachments while under the influence of alcohol, drugs, medication that
may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment.

Remember correct working methods and avoid leaving the driver’s seat unnecessarily.
. ..
WARNING
Hazard of thrown objects - Check all blades are connected securely. Check that all
blades are connected securely and that none of the blades is missing. Loose, damaged,
or missing blades can cause ejection of parts from the mower. Only use locking nuts for
fastening the blades.
WARNING
Risk of tipping over - Avoid overload and keep heavy load close to the loader. Keep
loads close to the ground whenever driving, especially during turns and uneven
terrain.
Pay attention that a heavy load or long distance between the loader and the
centre of gravity of the load will affect the balance and handling of the loader. The use of
additional counterweights is recommended especially when operating smaller loader
models. For 200 series loader the wheel weights are recommended. With heavy loads,
the telescopic boom must be kept retracted while moving with the loader. Always wear
seat belt.
WARNING
Risk of crushing - Never allow anyone to get under a
lifted attachment or loader boom.
Keep in mind that the
loader boom can be lowered or tilted even if the engine has
been shut down (crushing hazard). The loader is not intended
to be left to keep a load elevated for longer periods. Always
lower the attachment to a safe position before leaving the
driver's seat.
.