background image

 

 

17 (32) 

 

 

6.

 

Instructions for use 

Check the attachment and the operating environment once more before starting to work, and that all obstacles 

have been removed from the operating area. Quick inspection of the equipment and the operating area before 

use are parts of ensuring safety and the best performance of the equipment. 

 

 

 

 

DANGER

 

Hazard of thrown objects and cutting - Check all guards 
are installed.

 Before using the mower, check that it is intact 

and that all protective covers and collector related parts are in 
place. Keep a safe distance from the attachment when it is 
running and stay back if other person operates the controls of 
the loader. 

 

 

 

 

 

 

 

WARNING

 

Thrown objects -  impact hazard.

  Always keep a safety 

distance of at least 2 metres to other persons. Note that the 
mower may throw stones, gravel, or other objects found in 
the area at high speed. Do not allow others to get near a 
running mower. Whenever possible, avoid mowing on areas 
with loose objects. 

 

 

 

 

 

 

 

WARNING

 

Risk of tipping over - Avoid overload. 

Loader can tip over 

when handling too heavy loads, or because of dynamic 
movements caused by driving with and handling of a heavy 
load. Do not extend the telescopic boom when the load 
approaches the lifting capacity of the loader, or when the 
loader boom is in horizontal position. When you notice that 
the rear wheels of the loader are about to lift from the ground, 
or if the load indicator of the loader (if fitted) signals: 

 

 

 

 

Lower the load calmly and retract the telescopic boom 

 

Avoid sudden changes in speed or direction whenever load is lifted 

 

Use additional counterweights as needed 

 

 

  

Summary of Contents for A35965

































Reviews: