AVANT A2868, Operator'S Manual For Attachment

Page: 9 / 18

9(18)
6.2. Installing the hydraulic hose kit and testing the operation
Check that the hydraulic quick couplings in the separate installation kit are the same type as the loader quick
couplings. Attach the attachment to the loader as shown on previous pages before assembling the hydraulic
components. Follow the assembly instructions shown on this manual and also remember safety instructions
from pages 4 and 5.
A multiconnector system can be installed instead of the standard quick couplings. Both types of couplings
are included in the hose kit A45866 until the end of 2012. Contact your dealer or nearest service point if you
want to change the type of the quick couplings of your loader.
The hydraulic hoses can be assembled correctly only when the attachment has been
attached to the loader. Keep all hydraulic components clean during assembly.
Lower the attachment on the ground, shut down the loader engine and release any
residual pressure from the hydraulic system of the loader. Follow the assembling
instructions carefully.
To prevent unintentional movements of the grapple and oil spray, do not connect the
quick couplings or the multiconnector to the loader before the hydraulic hoses and all
fittings have been tightened.
Contents of installation kit A45866 (for 300-700 series)
A45866 – Hose kit
Ref. Part Qty Description Ref. Part Qty Description
1 65251 1 Multiconnector 10 A32277 2 Hydraulic hose L=1900
2 64047 2 Connecting nipple 11 65602 2 Pipe clamp F75
3 73047 8 Usit seal ring R1/2” 12 72320 2 Nut M8 nyloc
4 64887 1 Hose clamp 13 A410342 1 Hose cover spiral
5 73767 1 Cover plate 14 A33633 1 Hose cover spiral
6 73443 1 Hexagonal screw M8*35
7 65594 1 Parking for multiconnector
15 73409 2
Quick coupling nipple, 300-700
series loaders
8 73954 2 Banjo bolt R3/8” L29 16 64878 1 Cover, blue, quick coupling
9 74481 2 Hexagonal head screw
M8*20
17 75753 1 Cocer, black, quick coupling
- The assembly kit A44701 may also be used (kit without multiconnector).
- Items 1-3 may be preassembled (or the multiconnector 65251 may include fixed fittings)
- Items 15-17 are included in the kit until the end of year 2012.
Tools needed for installation
- 6 mm Allen key
- 13 mm spanner
- 22 mm spanner
- 2 x 27 mm spanners
- 32 mm spanner