AVANT A2868 Operator'S Manual For Attachment Download Page 17

Page: 17 / 18

Silage Forks 2012 1

EY-vaatimustenmukaisuusvakuutus
EG-försäkran om överensstämmelse
EC Declaration of Conformity
EG-Konformitätserklärung

Valmistaja / Tillverkare / Manufacturer / Hersteller:

AVANT TECNO OY

Osoite / Adress / Address / Adresse:

Ylötie 1

33470 YLÖJÄRVI, FINLAND

Vakuutamme täten, että alla mainitut tuotteet täyttävät konedirektiivin turvallisuus- ja terveysvaatimukset (direktiivi

2006/42/EY muutoksineen). Seuraavia yhdenmukaistettuja standardeja on sovellettu:

SFS-EN ISO 12100, SFS-EN 982, ISO 4254-1

Vi försäkrar härmed att nedan beskrivna produkter överensstämmer med hälso- och säkerhetskrav i EG-maskindirektiv

(EG-direktiv 2006/42/EG som ändrat). Följande harmoniserade standarder har tillämpats:

SFS-EN ISO 12100, SFS-EN 982, ISO 4254-1

We hereby declare that the products listed below are in conformity with the provisions of the Machinery Directive

(directive 2006/42/EC as amended). The following harmonized standards have been applied:

SFS-EN ISO 12100, SFS-EN 982, ISO 4254-1

Wir erklären hiermit, dass die nachstehend aufgeführte Maschine konform ist mit den Bestimmungen der EG-

Maschinenrichtlinie (EG-Richtlinie 2006/42/EG mit Änderungen). Die folgende harmonisierte Normen wurden

angewandt:

SFS-EN ISO 12100, SFS-EN 982, ISO 4254-1

Kuvaus:

Avant-kuormainten kanssa käytettävä hydraulitoiminen tuorerehupihti

Beskrivning:

Hydraulisk fodergrep; arbetsredskap för Avant lastare

Description:

Hydraulic silage fork; attachment for Avant loaders

Beschreibung:

Hydraulische

Heu-/Silogreifer

; Anbaugerät für Avant Radlader

Mallit / Modeller / Models / Modellen:

Avant

300-700 series

80 cm

A2868

90 cm

A31512

Tuorerehupihti
Fodergrep
Silage fork
Heu-/Silogreifer

105 cm

A31519

Allekirjoitus / Namnteckning / Signature / Unterschrift: ____________________ 1.2.2011 Ylöjärvi, Finland

Risto Käkelä,
Toimitusjohtaja / Verkställande direktör /
Managing Director / Geschäftsführer

Summary of Contents for A2868



















Search results

Summary of Contents for A2868

Reviews:

Related manuals for A2868

Brands by name

Popular brands

AVANT A2868, Operator'S Manual For Attachment

Search results

Summary of Contents for A2868

Reviews:

Related manuals for A2868

Brands by name

Popular brands