background image

 

 

15 (20) 

 

 

6.1

 

Checks before use 

  Use only when all pins are locked and secured in place. 

  Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to 

enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to 

reverse with the loader. Never assume that bystanders will remain where you last saw them; 

especially children are often attracted to the moving equipment. 

  Check the general condition of the attachment and the loader, and check for possible hydraulic oil 

leaks. Do the daily checks of the loader, see the operator's manual of the loader. The attachment must 

not be used, if there is a fault in the hydraulic system of the loader or the attachment. Refer to Chapter 

7 for maintenance instructions. 

  Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure 

that the loader and the attachment are used in a safe manner and as intended. Do not allow children 

to operate the equipment. 

  Remember correct working methods and avoid leaving the driver’s seat unnecessarily.Practise the 

use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the 

particular loader model, it is recommended to practice its use without any attachments. 

 

 

6.2

 

Operator qualification 

Anyone who intends to use the attachment must: 

  Know the intended use of the attachment. 

  Know how to use the loader safely in different operating conditions. 

  Read and always follow the instructions concerning the use of the attachment in this operator's 

manual. 

  Have this manual and the operator's manual of the loader available. 

  Ensure that the loader and the attachment are used in a safe manner and as intended. 

  Never allow children to operate the equipment. 

  Never operate the loader or attachments while under the influence of alcohol, drugs, medication that 

may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment. 

  Complete any possible mandatory training required by the employer before use. 

 

Summary of Contents for A21689





















Reviews: