6 (24)
2.
Designed purpose of use
The AVANT XL High tip buckets are attachments that are designed and manufactured to suite AVANT multi
purpose loaders that are shown in Table 1. They are versatile buckets for earth-moving tasks, material
handling, levelling and snow clearing work. The bucket is equipped with a hydraulic tilting feature, which
makes it possible to unload the bucket to a higher level than a standard bucket. The bucket can be unloaded
at the height to which the tip of the bucket will reach.
The XL models are especially large in volume, making them the ideal choice when loading light materials. The
best tasks for the large bucket are snow transporting, loading of wood chips, recycling facilities or similar. The
tilting of the XL-model is actuated by two hydraulic cylinders for smooth operation even with full load. The
edge plates of the buckets are made of very high strength and wear resistant steel.
Various width options are available to best suite each task and loader model. When choosing a bucket, the
intended use of the bucket, and the model of the loader should be considered, as shown in Table 1. If the
loader is fitted with other than standard tyres, or differs from original specifications, consult your Avant dealer
to choose the best bucket. The XL High tip bucket is not designed for any other use than what is specified in
this manual and must not be used for any other purposes than what is intended for.
The attachment has been designed to require as little maintenance as possible. The operator can perform
regular maintenance tasks. All repair work can’t be performed by the operator, and demanding repair and
maintenance operations are to be left for professional maintenance. All maintenance work must be done using
proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by
using only original spare parts. A separate spare parts catalogue may be available, consult your Avant dealer.
Familiarise yourself with the manual's instructions regarding service and maintenance. Please contact your
AVANT retailer if you have additional questions about the operation or maintenance of the equipment, or if
you require spare parts or maintenance services.
Compatibility with Avant Loaders
Compatibility recommendations are based on the width of the loader and available lifting capacity. Do not use
too wide bucket when handling heavy loads, as the actual breakout force (bucket tilting capacity) decreases
with wide buckets and the overall performance will decrease. To estimate the lifting capacity of the loader the
Table 5 can be used together with the load diagram shown in the operator’s manual of the loader.
Table 1 - XL High tip bucket - Compatibility with Avant loaders
Avant
220
series 2
225
225LPG
313S
320S
320S+
419
420
520
R20
525LPG
R28
528
630
R35
635
640
745
750
760i
850
860i
e5
e6
A36841 1450 mm
-
-
-
(•)
(•)
•
•
•
(•)
A21273 1800 mm
-
-
-
-
(•)
•
•
•
(•)
It is recommended to use the attachment only with loaders marked with
•
in Table 1. When using with models
marked with (
•
), full performance may not be achieved. Additional counterweights may also be required. For
compatibility with a model not shown in table, contact your Avant dealer.
Summary of Contents for A21273
Page 2: ...XL High tip bucket 2019 1...
Page 24: ......
