34
500 Series
Work light kit (option)
The loader can be equipped with
extra work lights, making it easier
to work in low light. The lights are
operated with the switch on the
control panel (see page 24).
Headlight, beacon, blinker & reflector kit
(option)
This optional equipment enables
road traffic registration in certain
countries. Requirements vary in
different countries, please consult
your local AVANT distributor.
Warning beacon (option)
The beacon can be removed
quickly by unturning its retaining
screw and then by pulling the
beacon out. Place the protective
seal on the beacon stand to prevent
water entering and damaging the
connectors. Handle beacon with
care. The beacon is sealed and
its inner components cannot be
replaced or repaired by user.
Risk of electric shock - do not use or
service a faulty beacon.
Beacon includes high-voltage
components. Do not use or repair
damaged beacon, replace with new
one.
Light bar (option)
Flashing lights on the light bar, only
available on DLX cab.
Trailer coupling (option)
The loader can be equipped, as
an option, with a trailer coupling.
There are two types available:
a 50 mm ball hitch and a 50 mm
ball hitch with towing pin. Both can
be mounted either directly on the
rear bumper or on the extra back
weight.
Max. allowed vertical load of the
trailer coupling is 6900 N, max.
towing load is 6000 N.
Make sure that the weight on the trailer is distributed
correctly so that the trailer cannot cause an upward lifting
force on the trailer coupling.
Extra counterweights (option)
The loader can be equipped with
extra counterweights that are
mounted on the rear bumper.
Max. amount of extra weights
(29 kg/pcs) is 3 pcs. If the machine
is fitted with an extra weight with
trailer coupling, max. amount of
extra weights is 1 pcs. The loader
can also be equipped with an extra
side weight kit (80 kg or 180 kg)
which mounts behind the rear
wheels.
Hydraulic lifting device in the rear (option)
The hydraulic rear lifting device
allows mounting of some
attachments on the rear of the
machine, for example a sand
spreader or a rotary hoe. This
means that it is possible to use
a bucket or a dozer blade at the
same time in the front. Hydraulic
rear lifting device includes with a double acting auxiliary
hydraulics outlet. Hydraulic rear lifting device is optional
equipment available for Avant 528 and 530.
Extra back weight 29 kg
Rear side weight (2x40 kg)
Rear side weight (2x90 kg)
Operating instructions
WARNING
Summary of Contents for 500 Series 2019
Page 63: ... 63 500 Series Notes ...
