
Installation of AVANIT SHD5
94
AVANIT SHD5
4.5
Connect Data Storage (Optional)
Connect a data storage (USB stick or hard drive with USB connection) at the USB
connector to be able to access MPEG, MP3, JPG or other media data files.
4.6
Connect Power Supply
When all devices are properly connected to the receiver you can connect the
mains plug to the power outlet.
4.7
Insert Batteries of Remote Control
This describes the steps for inserting new batteries of the remote control or for
replacing empty batteries:
1.
Open the battery compartment on the bottom side of the remote control. Re-
move the cover of the battery compartment.
2.
Place the two batteries 1.5 V (type: AAA).
Ensure correct polarity!
3.
Close the battery compartment
Replace the batteries if certain remote control functions are
not performed any more or are performed incorrectly.
When replacing batteries, always ensure that all batteries
are replaced.
Summary of Contents for SHD5
Page 140: ...Doc Id 90 60 01 0093 ...