AVANIT SHD5, User Manual, Page: 126 / 140

Extended Settings and Functions
126 AVANIT SHD5
3. Align your motor antenna so that signal strength and signal quality (are dis-
played at the lower screen edge) reach maximum values.
4. Press
EXIT
to return to the submenu
Antenna Setup
.
 In the submenu
Antenna Setup
, select the item
Limit Setup
and press
OK
to
open the window
Limit Setup
. Proceed as described above.
7.2.4 Single Satellite
Here you can scan individual satellites for receivable channels.

At Satellite , select the satellite for which the scan should be performed.

Also here, options are limited to the satellites that are marked
in the
Satellite List as such satellites from which you want to
receive channels.

Select
Only FTA
31 to determine if scan should be made only for FTA channels or
for all channels.

At Scan Channel , select if you want to perform scan only for TV channels, only
for radio channels or for TV + radio channels.

At
Network Search
, select if you want to search for an individual channel ( No ) or
all channels of a channel network ( Yes ), e.g. PRO7, SAT1, KABEL1, SIXX. The item
Network Search will only be active after selecting the scan mode Preset Scan
(i.e. Standard Scan) .

At Scan Mode , select the scan mode:
− Preset Scan (Standard Scan)
: In such mode, only the frequencies included in
the TP list are regarded.
− Auto Scan (Blind Scan) : Here, all frequencies are scanned, whether they are
included in the TP list or not.

At Tuner , select the LNB to process the signals (if only one LNB is present, then
this item will not be active).

Start channel search by selecting
Search
and confirm by pressing
OK
.
31
FTA =
F
ree
T
o
A
ir = unencrypted channels