7) Constant Temperature
When the water level reaches to the point when it covers all jets, you can turn on the heating
function by pressing the button on the display panel or remote control. You can turn the
function OFF by pressing the same button one more time. When the symbol of constant
temperature is flashing or when you press button, you can adjust the temperature of
water with this button. Setting range is 15-45 degrees, please note when the
temperature is equal to the set temperature or higher, the function will not start working.
8) Ozone Treatment
By pressing button on the panel or remote control you will start the ozone function and it will
last for 15 minutes. After those 15 minutes the function will stop automatically. Pressing it once
again while the timer is still on will turn off the function earlier than after 15 min. You can see on
the display how much time is left when the function is on.
9) Waterfall
Pressing the waterfall button on the display panel or remote control will turn on the waterfall
function and start to fill up the water. The function will stop automatically when the bathtub will
be supplied with enough water. You can stop the function earlier at another water level by
pressing the same button once again.
10) Automatic Cleaning Function
After each shutdown, more or less after 10 minutes, the system will start self-cleaning function
and it will stop automatically after 2 minutes.
Dimensional Drawing
13
