5
FRY
1.
Press "Function" key and select "Fry" mode. The "Fry" and “Watt" indicators will light up.
The LED display will show Default Power.
2.
There are 8 power stages that can be adjusted by using the “+” and “-" keys.
The available power stages are 800W, 1000W, 1200W, 1400W, 1600W, 1800W, 2000W, 2200W,
and 2400W.
WATER
1.
Press “Function” Key and select “Water” mode. The “Water” and “Timer” indicators will light
up.
The LED display will show “0:15” which means the cooker will stop automatically after 15
minutes when the water has boiled.
2.
The temperature or power cannot be changed but you can reset the water boiling time. The
default is 15 minutes and this can be varied from 5 minutes to 59 minutes.
3.
Select the Timer/Pre-set button then “+” and “-“ key to adjust the time - the display will show the
time remaining.
MILK
1.
Press “Function” Key and select “Milk” mode. The “Milk” indicator will turn on.
The LED display will show “400” which means the cooker will heat using 400W of power.
2.
The temperature or power cannot be changed.
SOUP
1.
Press “Function” Key and select “Soup” mode. The “Soup” indicators will turn on.
The LED display will show “2000” which means the cooker will heat using 2000W of power
2.
The unit will heat on high power to boil the soup and then automatically switch to low power for
heating.
3.
The temperature or power cannot be changed.
Timer & Preset:
1.
While in operation you can press “TIMER” to set the time.
2.
The timer indicator will light up and the display will show “0:00”
3.
When the hour indicator is flashing you can adjust it by using the “+” and “-“ keys to set the hour.
Confirm your entry by pressing “TIMER”.
4.
Follow the same process to set the minutes.
5.
The display will then countdown the duration in minutes.
6.
When time reaches the set time the buzzer will beep several times then stop automatically.
7.
You can press “FUNCTION” to change to another state and cancel the timer. You can also press
“ON/OFF” to restart the cooker.
8.
You can also press the “TIMER” key to re-enter the time setting mode. If no confirmation is
made within 10 seconds the system will exit automatically.
9.
You can set a timer up to 23 hours 59 minutes.
10.
Preset is same as “Timer” setting
Cleaning and Maintenance
