CLEANING INSTRUCTIONS
CIRCUIT DIAGRAM
5.
1.
Clean the food processor and accessories prior to initial use and after each use.
2.
Do not use harsh abrasive-type cleaners or steel wool on any part of the food processor.
3.
Remove the bowl or continuous feed attachment by twisting clockwise and lifting the
attachment off the base.
4. Never Immerse the motor base in water!
5.
Use a small brush and cleaner such as Noble Chemical’s 147SUNBRIGHT to clean the motor
shaft and top of motor base. Do not dump water on the base or get water near the motor
vents in the base. Rinse and wipe dry.
6.
All parts are dishwasher safe. If handwashing and sanitizing, it is recommended to use
147SUNBRIGHT as soap and 147QUIKSAN, both from Noble Products, as cleaner and
sanitizer. Handwashing and sanitizing will prolong the life of your food processor accessories.
Dish machines will wear the plastic and rubber faster than handwashing.
7.
Always wear cut resistant gloves while handling the S blade.
8.
Allow all parts to air dry before wiping dry completely and reassembling.
Control panel
CONTROL BOARD
BROWN
BLUE
GREEN/YELLOW
START
OFF
PILOT LAMP
CP
CPM DCS
CL Micro Switch 1
CL Micro Switch 2
CU Micro Switch 2
BLUE
RED
C
RED
RED
RED
RED
BLACK
BLACK
BLACK
BLACK
WHITE
WHITE
PTO
MOTOR
IP
MC
AC110V 60Hz
