GENERAL INSTRUCTIONS
2.
1.
Ensure the blender is in the off position and place the container on the blender
base. Make sure the blender is fully seated so that the drive coupling is in
contact with the container and the base. Plug the blender into a 120V outlet.
2.
Put the ingredients into the container and place the lid on. Push the lid down
as far as it can go on to the container.
3.
This blender has touchscreen controls that feature an adjustable timer, 8
speeds, pulse, and 5 programmable options.
4.
You can blend using either the timer and a speed selection, or by selecting any
one of the 5 programs. If blending by time, use the touchscreen up and down
arrows to set the time, which can be seen on the LCD display.
5. Speed Settings:
Select your speed from the 8 settings
• Speed 1
7,000 RPM
• Speed 2
9,000 RPM
• Speed 3
12000 RPM
• Speed 4
16,000 RPM
• Speed 5
20,000 RPM
• Speed 6
22,000 RPM
• Speed 7
24,000 RPM
• Speed 8
26,000 RPM
6. Pulse:
This blender is also equipped with a pulse feature, which is engaged by
holding down the “
” button. The blender will run on high speed until the
button is released. It will then return to the current speed setting.
7. One Touch Start:
This feature allows you to use the most recent blending
settings without having to re-program them. Once you’ve secured the
container back on the blender base, simply press the start button and the unit
will activate using the most recent time and speed settings
8. Timer:
Time can be set in increments of 1 second up to 1½ minutes.
9.
Always allow the motor to stop completely before adding or removing the
container from the base. Not following this warning could cause damage to the
blender which may void the warranty if it is deemed misuse is the cause for the
malfunctions.
10.
Do not operate the blender without a lid.
11.
Always hold the blender container with one hand by the top of the lid to
ensure the container remains secure atop the base.
12.
Wash and dry the container after each use.
