Avalue Technology VMS-BYT, Quick Reference Manual

Page: 18 / 117

VMS-BYT
18 VMS-BYT Quick Reference Guide
2.3 EBM-BYTV Jumper & Connector list
Jumpers
Label Function Note
JCMOS1 Clear CMOS 3 x 1 header, pitch 2.00mm
JRI1/2 COM 1/2 pin 9 signal selector 3 x 2 header, pitch 2.00 mm
JAT1 AT/ATX Jumper 3 x 1 header, pitch 2.00 mm
SW1
Serial port 1/ 2
– RS485 mode
selector
DIP switch 10pin
SW2 Power Input selector DIP switch 4pin
JVR1 LCD backlight brightness adjustment 3 x 1 header, pitch 2.00 mm
JDDI1 IET interface DP mode selector 3 x 1 header, pitch 2.00 mm
JDI1
Digital Input selector 4 x 2 header, pitch 2.00 mm
JDO1 Digital Output selector 4 x 2 header, pitch 2.00 mm
JACC1 ACC Function 3 x 1 header, pitch 2.00 mm
JCAN1
CAN/COM selector 2 x 1 header, pitch 2.00 mm
Connectors
Label Function Note
USB_REAR USB 2.0 connector
USB_FRONT USB 3.0 connector
JCMOS2 Clear CMOS (Reserved) 3 x 1 header, pitch 2.00 mm
JM1 MCU download connector
5 x 1 header, pitch 2.00 mm
JUSB1 On-board header for USB2.0 5 x 1 wafer, pitch 2.00 mm
JUSB2 On-board header for USB2.0 6 x 1 wafer, pitch 2.00 mm
LAN1/2 LAN connector 1/2
VGA1 VGA connector
DIO1 General purpose I/O connector 6 x 2 wafer, pitch 2.00 mm
COM1 Serial port connector 1
COM2 Serial port connector 2 5 x 2 wafer, pitch 2.00 mm
CAN1 CAN Module slot
7 x 2 header, pitch 2.00 mm
CAN2 CAN box connector 9 x 1 wafer, pitch 2.00 mm
MPCIE1/2 Mini PCI Express connector 1/2 52 pin
PWRBTN Power button
RSTBTN Reset button