Quick Reference Guide
SID-15V Quick Reference Guide 21
2.2.4 Cable Routing on Bottom Cover
F
IG
.4D:
S
YSTEM
I
SOMETRIC
B
ACK
V
IEW
,
O
PENING THE
B
OTTOM
C
OVER
•
Locate and open the hinged Bottom Cover (highlighted in blue)
F
IG
.
4E:
S
YSTEM
I
SOMETRIC
B
ACK
V
IEW
,
C
ABLE
R
OUTING
T
HROUGH
B
OTTOM
C
OVER
•
Route the cables through the cable pass-through hole on the cover and attach the cables
to the system’s I/O.
NOTE: This hole should be lined with a plastic cable bushing to prevent wear on the cable. If
there is not bushing on the unit, one is available inside the accessory box.
•
Close the Bottom Cover. As illustrated in
Fig. 4E
, leave several inches of extra cable
slack in the door. This will prevent any strain on the cable if the display was tilted on the
mount.
2.2.5 Completing the Installation
•
Once complete, close and lock the Bottom Cover.
•
Reinstall the Cable Cover on the Arm. Make sure that all of the cables are not visible
and hidden properly behind the Cover.
