REV-SA01 User
’s Manual
30 REV-SA01
User’s Manual
3.6 Bootloader settings for booting from SD card
1) Please turn on the Pin 2&3 of the DIP switch as below for booting from SD card .
2) Insert SD card on SD socket. Connect RS232 cross over cable from
COM1
of
mianboard to COM port of Host PC.
3) Run hyper terminal program on Host PC (teraterm on Windows or minicom on Linux)
4)
Power on mainboard and press ”space” key to get into bootloader menu.
5) Setup boot device
SMARC U-Boot > print
Summary of Contents for REV-SA01
Page 9: ...REV SA01 User s Manual REV SA01 User s Manual 9 2 Hardware Configuration...
Page 10: ...REV SA01 User s Manual 10 REV SA01 User s Manual 2 1 Product Overview...
Page 11: ...REV SA01 User s Manual REV SA01 User s Manual 11...
Page 22: ...REV SA01 User s Manual 22 REV SA01 User s Manual 3 Linux User Guide...
