Avalue Technology HPM-246, User Manual

Page: 70 / 97

HPM-246
User’s Manual
70 HPM-246
User’s Manual
Item Option Description
Wake Up by Ring
Disabled
Enabled [Default]
Wake Up by Ring from S3/S4/S5.
USB Standby Power
Disabled
Enabled [Default]
Enable/Disabled USB Standby Power
during S3/S4/S5.
3.6.4 Server Mgmt
Item Options Description
BMC Support
Enabled [Default]
Disabled
Enable/Disable interfaces to communicate with BMC.
Wait For BMC
Enabled
Disabled [Default]
Wait For BMC response for specified time out. BMC
starts at the same time when BIOS starts during AC
power ON. It takes around 30 seconds to initialize
Host to BMC interfaces.
FRB-2 Timer
Enabled [Default]
Disabled
Enable or Disable FRB-2 time (POST timer).
FRB-2 Timer timeout
3 minutes
4 minutes
5 minutes
6 minutes [Default]
Enter value Between 3 to 6 min for FRB-2 Timer
Expiration value.
FRB-2 Timer Policy
Do Nothing [Default]
Reset
Power Down
Power Cycle
Configure how the system should respond if the FRB-2
Timer expires. Not available if FRB-2 Timer is
disabled.
OS Watchdog Timer
Enabled
Disabled [Default]
If enabled, starts a BIOS timer which can only be shut
off by Management Software after the OS loads. Helps
determine that the OS successfully loaded or follows