HID-2138 User Manual
HID-2138 Quick Reference Guide
4
4. If one of the following situations arises, please refer to the solutions:
Problem
Solution
The power cord or plug is damaged.
Contact manufacturer for further inspection.
Liquid has penetrated equipment.
Try to dry up excess liquid and contact manufacturer
for further inspection.
The equipment does not power on.
1. Check the adapter model to see if it is correct.
2. Confirm whether power adapter and power cord
is properly connected.
3. If the problem still exists, contact manufacturer for
further inspection.
The equipment has been damaged.
1. Power on the equipment to confirm whether the
function is still normal.
2. Contact manufacturer for repairment if needed.
5. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.
Do not use liquid or spray detergents for cleaning and keep this equipment away from
humidity.
Caution! To avoid short-circuiting and otherwise damaging the device, do not allow
fluids to come in contact with the device. If fluids are accidentally spilled
on the equipment, remove the affected unit from service as soon as
possible and contact the service personnel to verify that patient safety is
not compromised.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it
fall may cause damage. For plug-in equipment, the power outlet socket must be
located near the equipment and must be easily accessible.
Caution! To prevent overheating, do not cover the openings and place the device in
direct sunlight or near radiant heaters.
7. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet. Position the power cord so that people cannot step on
it. Do not place anything over the power cord. If the equipment is not used for a long
time, disconnect it from the power source to avoid damage by transient over voltage.
