Avalue Technology EMX-Q170KP, User Manual

Page: 52 / 83

EMX-Q170KP
User’s Manual
52 EMX-Q170KP
User’s Manual
Item Option Description
Terminal Type
VT100
VT100+ [Default]
VT-UTF8
ANSI
Emulation: ANSI: Extended ASCII char set.
VT100: ASCII char set. VT100+: Extends
VT100 to support color, function keys, etc.
VT-UTF8: Uses UTF8 encoding to map
Unicode chars onto 1 or more bytes.
Bits per second
9600
19200
38400
57600
115200 [Default]
Select serial port transmission speed. The
speed must be matched on the other side.
Long or noisy lines may require lower
speeds.
Data Bits
7
8 [Default]
Data Bits.
Parity
None [Default]
Even
Odd
Mark
Space
A parity bit can be sent with the data bits to
detect some transmission errors. Even:
parity bit is 0 if the num of 1
’s in the data bits
is even. Odd: parity bit is 0 if num of 1
’s in the
data bits is odd. Mark: Parity bit is always. 1.
Space: Parity bit is always 0. Mark and
Space Parity do not allow for error detection.
They can be used as an additional data bit.
Stop Bits
1 [Default]
2
Stop bits indicate the end of a serial data
packet. (A start bit indicates the beginning).
The standard setting is 1 stop bit.
Communication with slow devices may
require more than 1 stop bit.
Flow Control
None [Default]
Hardware RTS/CTS
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a
‘stop’ signal can
be sent to stop the data flow. Once the
buffers are empty, a
‘start’ signal can be sent
to re-start the flow. Hardware flow control
uses two wires to send start/stop signals.
VT-UTF8 Combo Key
Support
Disabled
Enabled [Default]
Enable VT-UTF8 Combination Key Support
for ANSI/VT100 terminals.
Recorder Mode
Disabled [Default]
Enabled
With this mode enabled only text will be sent.
This is to capture Terminal data.
Resolution 100×31
Disabled
Enabled [Default]
Enables or disables extended terminal
resolution.
Legacy OS Redirection
Resolution
80
×
24 [Default]
80
×
25
On Legacy OS, the Number of Rows and
Columns supported redirection.
Putty KeyPad
VT100 [Default]
LINUX
XTERMR6
SCO
ESCN
VT400
Select FunctionKey and KeyPad on Putty.
Redirection After BIOS
POST
Always Enable [Default]
BootLoader
The Settings specify if BootLoader is
selected then Legacy console redirection is
disabled before booting to Legacy OS.