Avalue Technology EAX-Q35 User Manual Download Page 41

Page: 41 / 89

User’s Manual

EAX-Q35

1.8.9

System Panel Connector (F_PANEL)

This connector supports several chassis-mounted functions.

System Power LED (2-pin PWRLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED

cable to this connector. The system power LED lights up when you turn on the system

power, and blinks when the system is in sleep mode.

ATX Power Button/Soft-off Button (2-pin PWRSW)

This connector is for the system power button. Pressing the power button turns the

system on or puts the system in sleep or soft-off mode depending on the BIOS settings.

Pressing the power switch for more than four seconds while the system is ON turns the

system OFF.

Hard Disk Drive Activity LED (2-pin HDLED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable

to this connector. The IDE LED lights up or flashes when data is read from or written to

the HDD.

Reset Button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without

turning off the system power.

Summary of Contents for EAX-Q35


























































































Search results

Summary of Contents for EAX-Q35

Reviews:

Related manuals for EAX-Q35

Brands by name

Popular brands

Avalue Technology EAX-Q35, User Manual

Search results

Summary of Contents for EAX-Q35

Reviews:

Related manuals for EAX-Q35

Brands by name

Popular brands