AID-240SBW Quick Reference Guide
AID-240SBW Quick Reference Guide
19
Please follow below steps to connect power cable to system.
The AID-240SBW could only be powered by a DC power adapter (EDAC Model
no. EM11013C). Be sure to always handle the power cords by holding the plug ends
only.
Follow these procedures in order:
1. Connect the female end of the power adapter to the DC jack of the panel PC.
2. Connect the female end of the power cord to the DC power adapter.
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
External equipment intended for connection to signal input/output or other
connectors, shall comply with relevant UL standards (e.g. UL 60905-1 for IT
equipment and ANSI/AAMI ES60601-1/ IEC 60601-1 series for medical electrical
equipment
