Avalon APAC140HC, User Manual

Page: 14 / 27

9
Misting Drain
Your unit also includes the unique Misting Drain option. If a drain is not present this option will allow
the unit to remove the excess moisture out of the exhaust hose through a mist nozzle. The mist nozzle
MUST be setup in the exhaust hose and NOT the intake hose. In order to run the misting drain option
you will need to do the following:
1.
Connect the included water line to the unit. You will need to attach the quick connect adapter on the
end of the water line to the back of the unit.
2. Run the remaining water line into the exhaust hose through the opening in the exhaust hose adapter.
This adapter MUST be installed on the exhaust outlet of the unit. If the adapter is not installed in this
position you will need to adjust the adapters. Run the excess water line into the cavity of the
exhaust hose.
3. Connect the mist nozzle to the end of the water line. Ensure the water line is attached securely to
the mist nozzle.
CAUTION: The water line will
contain some water if the
pump has been in use. If you
are going to detach the water
line from the unit be sure to
keep the end of the water line
elevelated once it is detached
to avoid water spilling. Drain
the remaining water in the
water line if you are preparing
for storage of the unit.
Note: The water line quick connect includes a trigger to let the unit know a water line is attached. The unit
will not pump water out of this drainage hole unless the quick connect water line is attached.
Caution: The water line will contain some water if the pump has been in use. If you are going to detach the
water line from the unit be sure to keep the end of the water line elevated once it is detached to avoid
water spilling. Drain the remaining water in the water line if you are preparing for storage of the unit.