Avalon Bay Air Fryer Product Guide
7
http://www.avalon-bay.com
Using the Appliance
Hot Air Frying
1.
Put the main plug in an earthed wall socket.
2.
Carefully pull the frying tray out of the air fryer.
3.
Put the ingredients in the basket.
Note:
Never fill the basket beyond the maximum amount indicated in the table shown in the
section “SETTINGS”, on page 9, as this could affect the quality of the end result.
4.
Slide the frying tray back into the air fryer.
Never use the frying tray without the basket in it.
5. Turn the temperature control knob to the required temperature. See section “SETTINGS” on
page 9, to determine the right temperature.
6. To switch on the appliance, turn the timer knob to the required preparation time.
Add 3 minutes to the preparation time when the appliance is cold.
Note:
You can also let the appliance preheat without any ingredients inside. In that case, turn
the timer knob to a little more than 3 minutes and wait until the “HEATING UP” light goes out
(after approximately 3 minutes), then fill the basket and turn the timer knob to the required
preparation time.
The “POWER ON” light and the “HEATING UP” light will come on.
The timer starts counting down the set preparation time.
During the hot air frying process, the “HEATING UP” light comes on and goes off from time
to time. This indicates that the heating element is switched on and off to maintain the set
temperature.
Excess oil from the ingredients is collected at the bottom of the frying tray.
7. Some ingredients require shaking halfway through the preparation time (see section “SETTINGS”
page 9). To shake the ingredients, pull the frying tray out of the appliance by the handle and
shake it. Then slide the frying tray back into the air fryer.
CAUTION: Do not press the basket release button during shaking.
8. When you hear the timer bell, the set preparation time has elapsed. Pull the pan out of the
appliance and place it on a heat resistant surface.
