3
Window Kit Installation Instructions
You must vent your portable air conditioner when running it in
cooling mode or heat mode (certain models). Your unit includes a
window exhaust kit that can be used to vent the unit out a window.
Before you begin, make sure you have all the parts necessary for
installation.
If you have multiple windows, choose one that is near an electrical
outlet that will be able to provide sufficient power to your unit. See
the power requirements listed on the product label printed on the
side, or on the back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding
window as shown in the following pictures:
Preparations for installing
the window kit
Window Kit Parts List:
Parts for Continuous and
Misting Drainage
4 Duct Connectors
2 Grated Adapters
8 Screws
2 Exhaust Hoses
2 Exhaust Covers
1
Window Kit Plate
with Holes
2 Window Kit Plates
NOTE: You may need to
contact your electrician if
your room’s circuit is not
able to power your unit.
NOTE: There is one duct
connector that includes
an opening for the water
line for use in the misting
drain operation. This
connector must be
installed to the exhaust
outlet on the unit. Please
review pages 9-10 for
more details.
NOTE: Exhaust Covers
may be attached to the
Grated Adapters. You
may need to twist and pull
apart to separate them.
1 Water Line
1 Misting Nozzle
