Avago Technologies
-
7
-
LSI SAS 9300-8e PCI Express to 12Gb/s SAS Host Bus Adapter User Guide
March 2015
Technical Support
Figure 2 Install an LSI 12Gb/s x8 HBA in a PCIe Slot
NOTE
The shape, size, and locations of the components on your HBA and its
bracket might vary from this illustration. The HBA requires a x8
PCIe slot.
6.
Secure the HBA bracket to the system’s chassis.
Install the bracket screw, if applicable, or engage the system
retention mechanism to secure the HBA to the system’s chassis.
7.
Replace the cover of the chassis.
8.
Connect SAS cables between the HBA and the SAS enclosure that contains SATA or SAS devices.
The LSI
12Gb/s SAS HBA has two SFF-8644, external x4, mini-SAS HD connectors. Use a cable with an external mini-SAS HD
connector (SFF-8644) on one end (to connect to the HBA) and the appropriate connector to attach to the enclosure
that contains SAS or SATA devices on the other end.
9.
Reconnect any power cords, and power up the system.
Reconnect any power cords and reconnect any network
cables. Turn on the power.
The hardware installation of your LSI 12Gb/s SAS HBA is complete.
8
Technical Support
For assistance installing, configuring, or running the LSI 12Gb/s SAS HBA, contact Technical Support:
Email:
Website:
http://www.lsi.com/support/pages/submit-support-request.aspx
?
%DGEOF(OST"OARD
"IT3LOTS
6/NLY
0#)%XPRESS
X3LOT
"IT3LOT
6/NLY
"RACKET
3CREW
0RESS
(ERE
0RESS
(ERE
4O$RIVE
%NCLOSURES
-INI3!3($
%XTERNAL
#ONNECTORS
Summary of Contents for LSI SAS 9300-8e
Page 9: ......
