background image

Avago Technologies

4

 -

LSI SAS 9300-8e PCI Express to 12Gb/s SAS Host Bus Adapter User Guide
March 2015

Operating System Support

3.2

SAS-3 Interface

The LSI SAS 3008 controller chip contains the SATA+SAS functionality for the LSI 12Gb/s SAS HBA. The following table 
shows the LSI SAS 12Gb/s SAS performance.

3.3

Active Cable Management Support

The HBA optionally supports active cable management. To enable this feature, download and implement the firmware 
option labeled SAS93

xx

_

xx

_IT_ACM, where 

xx_xx

 matches your product. You must enable active cable 

management for applications with active optical cables.

4

Operating System Support

The LSI 12Gb/s SAS HBA supports all major operating systems: Windows

®

, Linux

®

 Red Hat

®

, Linux SUSE

®

 Enterprise 

Server (SLES), and VMware

®

. The HBA also supports Solaris

®

 11 Update 2. Refer to 

http://go.lsi.com/hbas

 for details on 

the software versions and device driver support. For Solaris support, contact the Avago

®

 Technical Support team.

5

LSI SAS 9300-8e HBA Characteristics

5.1

Memory

The LSI 12Gb/s SAS HBA provides one 4-M × 16-bit Flash ROM to store the firmware and the BIOS.

5.2

LED

The LSI 12Gb/s SAS HBA Heartbeat LED, CR1, blinks green to indicate the HBA is capable of general activity.

5.3

Connectors

PCIe Connector (EC1).

 The LSI 12Gb/s SAS HBA supports a x8 interface. The PCIe host interface connection is through 

the edge connector, EC1, which provides connections on both the top (EC1 B) and bottom (EC1 A) of the board. The 
signal definitions and pin numbers conform to the PCIe specification.

SATA+SAS Connector (J6).

 The LSI 12Gb/s SAS HBA supports SATA and SAS connectors through connectors that are 

SFF-8644 mini-SAS HD, external connectors.

5.4

Physical Characteristics

The LSI 12Gb/s SAS HBA is a 6.6-in. × 2.7-in., low-profile board. The component height on the top and bottom of the 
LSI 12Gb/s SAS HBA is in accordance with the PCIe specification. The following figure shows the HBA board layout.

Half Duplex

Full Duplex

Narrow port (one lane), 1200 MB/s Narrow port (one lane), 2400 MB/s

Wide port (four lanes), 4800 MB/s

Wide port (four lanes), 9600 MB/s

Summary of Contents for LSI SAS 9300-8e










Reviews: