5. References
FCC and Regulatory Notices
31
OneConnect OCe14000B-series Adapters Installation Manual
pub-005129 Rev. A
FCC and Regulatory Notices
OCe14000B-series Adapters
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Responsible Party:
Jeff Benck, President and Chief Executive Officer
Emulex Corporation (714) 662-5600
3333 Susan St. Costa Mesa, CA. 92626 USA
Note:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
The reader is cautioned that changes or modifications made to the equipment not
Agency Approvals
• Class 1 Laser Product per DHHS 21CFR (J) & EN60825-1 when equipped with
approved optical devices
• UL recognized to UL60950-1 2nd Edition
• cUR recognized to CSA 22.2, No. 60950-1-07
• TUV certified to EN60950-1:2006 +A11 +A1 +A12+A2
• FCC Rules, Part 15, Subpart B, Class A
• Industry Canada, ICES-003, Class A
• EMC Directive 2004/108/EC and 2014/30/EU (CE Mark)
EN55022:2010, Class A
EN55024:2010
• Australian EMC Framework (C-Tick or RCM Mark)
AS/NZS CISPR22:2009 +A1, Class A
• Japan VCCI, Class A
• Taiwan BSMI, Class A
• Korea MSIP, Class A
• RoHS Compliant (Directive 2011/65/EU)
• China RoHS compliant
Vibration, peak acceleration
0.25g (5 Hz to 500 Hz)
(Sweep Rate = 1 octave/min.)
Table 5-1
Adapter Specifications (Continued)
Parameter
Range
